During the month of April I am doing two-a-days with dry practice. Aside from my normal practice routine with my EDC handgun, I am also spending ten minutes per day with my shotgun. This has me thinking a lot about the defensive shotgun setup. Additionally, with the surge of gun sales in recent weeks I’m sure at least a few people are the brand-new owner of a shotgun, so I will share a few of my ruminations.
This article contains affiliate links.
When I was a kid the shotgun was THE defensive long arm of choice. Be it a 26″-barreled Remington 1100 Wingmaster with a few rounds of buck, an old side-by-side propped by the front door, or (in my dad’s case) a single-barrel 20-gauge and three or four shells in your pocket, the shotgun was the go-to for defensive long arm. The same was true for cops of the era. If cops were jumping out with anything more than pistols, they were grabbing scarred, wooden-stocked 870s. I am an unabashed fan on the shotgun, possibly because of the influence of growing up in the 80s. Maybe it was the recognition of the awesome power of a single round of 12-gauge. Or maybe it is my personal history of having lived in places where rifle choices were severely restricted, but ownership of good defensive shotguns wasn’t.
The latter was the case twelve or thirteen years ago when I purchased my Scattergun Technologies 870. I was living in a state that, for all intents and purposes, still abides by the Assault Weapons Ban of ’94. There was a vibrant used market in that state which I enjoyed but magazine-fed rifles were scarce and expensive. Rather than start in the stagnant rifle market, I decided to invest in a good defensive shotgun. I’m so very glad I did. As a matter of fact, if I had to give up a bunch of long guns for financial reasons or whatever, my shotgun would probably be one the last two to go.
Every day it surprises me a bit more how many “gun guys” I know that don’t own a shotgun. Even that number is dwarfed by the number of gun guys that don’t really know how to run their shotgun, or haven’t taken theirs to the range in a month of Sundays. I’m not the expert on the shotgun, but I’m honestly probably more proficient than most.
My shotgun is a Wilson Combat/Scattergun Tech “Border Patrol” built on a Remington 870. Until recently the big debate in shotguns was “pump vs. semi-auto.” Pump shotguns were sort of perceived as the revolvers of the shotgun world: they were thought to be more reliable, but required more user interaction to operate. Likewise, semi-autos were perceived to maybe be a little easier to operate, a little lighter recoiling, if a tad less reliable. At this point I’m sure you’re seeing at least a few parallels between the “revolver vs. semi-auto” debates of the 1980s.
Today, semiautomatic shotguns have had a bit of a come-up, and now the pump gun might not be the clear choice of the serious user that it once was. I’m seeing semi shotguns like the Beretta 1301 Tactical popping up all over the place. Semi-auto shotguns are the choice of serious competitors, and they’re now championed by savvy users like Chris Baker of Lucky Gunner Lounge. I’ll be honest, if I were in the market for a shotgun these days I would probably be hunting for the 1301 Tac. That being said, the pump gun is still perfectly adequate for anyone willing to put the time into the platform. In fact – not so long ago – I spent a couple months carrying a 14″ 870 (stuffed with slugs) in urban environments in Afghanistan, and I’d gladly do it again.
Point being: don’t get super hung up on it. Both will work. Whether you want to run a pump or semi-auto, prove your gun reliable, and learn to run it like crazy. Let’s talk about a few features you may want to consider on your shotgun. These are listed roughly in the way I would prioritize them in most instances. Unfortunately, I’m also going to talk about some things I’ve tried that didn’t work.
The traditional shotgun “sight” is the bead. A lot of good work has been done with a bead sight. If that’s all you’ve got, you can probably do some good work with it, too. On the other hand, just because something worked for a long time doesn’t mean it’s just as good as newer options. A lot of people have successfully defended themselves, for instance, with bows and arrows, but there are massively better options today. There are definitely better options for shotgun sights than the traditional bead front. For me – good sights are non-negotiable.
I am a big fan of the ghost ring setup. The ghost ring setup has a fairly wide aperture rear partnered up with a fairly course front sight. A lot of defense-oriented shotguns these days come with some form of ghost ring, including the aforementioned Beretta 1301 Tactical, shotguns in Benelli’s tactical line, certain models of the Mossberg 590, custom 870s from Nighthawk Custom, Vang Comp Systems, Wilson Combat, and more. And for good reason. The ghost ring is fast, yet capable of some surprisingly good accuracy. The ghost ring is probably the most common upgraded sighting option on a shotgun, but its far from the only one.
Shotguns are also available with traditional, open rifle sights. Remington sells a hunting-oriented 870 with rifle sights. The barrel can often be purchased separately and an 870 “Police” barrel with rifle sights is sold separately for around $250, if you’re interested in upgrading an existing shotgun. For that matter, XS Sights offers shotgun sight upgrades for Benelli, Beretta, Mossberg, Remington, Winchester shotguns that will fit nearly any variation of barrel from vent-rib to plain barrel with bead.
Another fantastic option is the red dot optic. More and more shotguns are coming equipped with a top rail specifically for the addition of an optic. I don’t think that was a very popular option back when I purchased my shotgun, but if I were doing it now, I would get something provisioned for the placement of an optic. I could add that now, but it would take time and require a gunsmith to install, something that hasn’t risen quite high enough on my list of priorities.
In my opinion, a weapon-mounted light is second only to sights in importance. I have kind of dropped the ball here; my shotgun hasn’t gotten a whole lot of attention lately (I’ve been all about the carbine since moving to the new place) and I’m not running the light I want to be running. I have had a couple different lights on this gun; some worked, some didn’t, some are on different guns now, some are broken or gone.
Currently I’m running a Streamlight TLR-1 on a Magpul forend. This is an “extra” light I had lying around and to be honest, I don’t really like it (I’m not sure why I’ve never given my shotgun the light it deserves). The TLR-1 sticks out too far, the switch isn’t ideally operated while side-mounted, and it interferes with a sling. A sling isn’t non-negotiable in my book, but I like having the option. Most importantly, the side-mounted TLR-1 isn’t ambidextrous.
Further, I’m not super confident in the mounting capability of the Magpul forend. I have dropped my shotgun on the light (while working one-handed manipulations) and had the light pull off. Actually, just one of the stays pulled completely free, but that left the light dangling precariously by the other. The metal stays of the M-LOK system versus the plastic of the forend don’t quite add up.
I hope to replace this soon, probably with the Streamlight TL-Racker forend with integrated light, and I’ll let you know how it goes, and how whatever lighting product I select works.
Extended Magazine Tube
I believe an extended magazine tube is a high-priority addition to a defensive shotgun. Standard capacity for an 18″ shotgun is only four – or maybe five, plus one. Running a shotgun is a constant game of ammunition management (probably the topic of my next shotgun-related article). Adding a couple of rounds of capacity is a very good thing; I’d rather add two rounds IN the gun than half a dozen outside. I think your magazine tube should come as close to mirroring your barrel length as possible without exceeding it, at least for the shorter-barreled shotguns.
I am a fan of Wilson Combat magazine extensions. Plenty of others are out there and doubtlessly some of them are good, but I can’t personally vouch for any of them. Keep in mind, you probably get what you pay for.
Additional Ammunition Carriage
As I just mentioned, running a shotgun is a huge game of ammunition management. There aren’t many rounds in a shotgun – maybe eight or nine at the very high end – and you can go through them pretty quickly. The least expensive option – and one requiring no permanent modification – is the butt cuff with five or six elastic loops. These range from simple elastic cuffs to more elaborate designs. These aren’t a bad option, though I don’t think they’re ideal. They’re real hard to get ammo out of when the gun is shouldered and they certainly impact balance. If grandpa’s old bird gun is what you’ve got, this would be a decent way to improve on it.
Next up are the side-saddle type rigs. These come in two basic varieties: hard and soft. I am personally kind of fed up with the hard ones. I’ve used the rigid plastic side-saddles and found they work OK. My Wilson shotgun came with the much more expensive Mesa Tactical aluminum side-saddle, which didn’t really work with a shit; some loops held rounds too tightly, some let rounds slide right through. Your results may vary, but I don’t like the hard side-saddles.
I do, however, really like the newer breed of “soft” side saddles. These usually involve applying a strip of pile portion of hook-pile tape (for you non-parachutist types: the soft side of Velcro) to the gun’s receiver. The side-saddle itself is a strip of webbing with loops sewn on one side and hook-portion sewn on the other. You can have a bunch of these things pre-loaded and treat them sort of like magazines…or you can just have one that you have the option of taking off the gun as needed. My favorites are the 6-round Shotgun Cards from ESSTAC. I’m going to talk much more about managing shotgun ammunition in a future article, so stay tuned.
There are also some really un-good options for shotshell carriage: most notably the the sling with shotshell loops. I don’t like the sling with shell loops because shotshells swaying side-to-side are absolutely going to affect your ability to place accurate shots. Second, dangling some distance below the forend of the gun doesn’t place rounds in a great place for anything, nor does the sling do a whole lot for you.
870-Specific: Extended Safety
This one is on a case-by-case basis. If you have a Mossberg shotgun with the tang-mounted safety, you’re already good to go. If you have a Remington 870/1100/11-87, I strongly recommend Vang Comp Systems’ Big Dome Safety. This enlarged safety is still perfectly safe, but allows you to switch the safety off much more quickly and easily than the flat, factory safety. As my finger moves into the trigger guard, the first knuckle of my finger contacts the safety. It takes only a slight conscious effort to depress and disengage the safety. I am really enamored with this design and have been for a long time. As a matter of fact, my shotgun even shipped with an enlarged safety from Wilson Combat but I was still compelled to replace it with the superior product from Vang Comp.
I know it’s unpopular these days, but I like a pistol-gripped stock on my shotgun. On the 870, I believe it puts the trigger finger in the ideal location to manage the safety.
Were I running a Mossberg I would have a traditional shotgun stock – an updated traditional stock like the Magpul SGA, but I like the 870 with a pistol-grip stock. The stock on my shotgun currently is the Urbino from Mesa Tactical. It went on the gun after a stock from Speedfeed failed rather spectacularly. If I have to replace this stock for any reason it will probably be with the Magpul stock.
The necessity of a sling totally depends on your mission. If your mission is to barricade the bedroom door, you don’t need a sling. In fact, you may very well be better off without one – there’s no sling to foul your pump.
If your mission is to move around your house or property, you might think about a two-point sling. If you end up in a tussle for the gun, it’s your strength against the other guy’s strength unless the gun is attached to your body. This is especially true if you get caught of guard with the gun in one hand because, let’s say you have to pause to open a door. Even with zero hands on the gun, it’s going to be tough(er) to take a slung shotgun away from you.
I don’t currently have a sling on my gun because of the light configuration (the TLR-1 on the sling side) and because my shotgun isn’t on home duty at the moment. Once I resolve the lighting issue I will put the VTAC sling back on.
I started writing about this and realized there’s probably enough here for its own article. The short version is, my shotgun is loaded with slugs. I have a case or two of buckshot, but I generally prefer slugs over buckshot. In my next article on the shotgun I explain why, in detail.
That’s probably enough rambling for now. I thought this was going to be a short little post, but there are still things I didn’t get to that will probably be article-length pieces. I didn’t even get around to talking about the role the shotgun fills for me. Stay tuned for upcoming work on the shotgun.
In the meantime, if you know someone who is relying on a shotgun for home defense and needs some knowledge, sent them a link to this. But don’t stop there. I’m not an authority on the shotgun and there are a lot of good resources available online. One of my favorites is the suite of defensive shotgun information put together by Chris Baker at Lucky Gunner Lounge. I don’t agree with everything Chris does, but if we agreed on everything we wouldn’t be human.
Better yet, get some training on the shotgun. Like most people this is probably my biggest training deficit but there are some really good instructors out there. Rob Haught (does anyone know if he’s still teaching and if so, where to find a schedule?), Darryl Bolke & Wayne Dobbs, Tim Chandler, Tom Givens, and Greg Ellifritz are all well respected instructors of the shotgun.